"Flow Over" stripping is a process where an item is placed in a large tank and commercial strippers

made for this type of system are pumped over a piece, keeping it wet. The chemicals are recycled

to be used over again. The chemicals are a cold process solution so that no harm is done to the 

 furniture joints, woods, or veneers. This has replaced the old "dip tanks" that used a lye based chemical that was very harmful to woods.  When a piece is stripped using the "Flow Over" system and 

washed  with a chemical solvent (not water) , it comes out clean, not discolored, and the grain is not 

raised. Very little sanding has to be done. Stripping by hand cannot come close and give the results like our system provides.

Below is a desk that was brought to us to be refinished. It had been painted a dark color. The client

wanted the desk to be refinished to a natural finish. This process could not have been achieved unless

the wood was completely cleaned and stripped using our "Flow Over" system.

Click on thumbnail to enlarge   

                   Before         During                    After                

Member Claims Prevention and Procedure Council

{Commercial}  {Residential}  {In the news}  {History}   {Testimonials} {TV Commercial} {Our Shop}  {Home}

(Insurance Adjusters)

Copyright 1999, 2000 Manoly Furniture Service

Website created by Manoly Enterprises